Policies

Certificate of Analysis (COA) Policy

ContinuumX Research LLC (“ContinuumX Research,” “Company,” “we,” “our,” or “us”) is committed to providing transparent product documentation through independent third-party laboratory testing. This Certificate of Analysis (“COA”) Policy explains how COAs are generated, what information they provide, and how customers should interpret them.

Effective Date: July 27, 2026Last Updated: July 27, 2026

1. Purpose of a Certificate of Analysis

A Certificate of Analysis (COA) is a laboratory document that reports the analytical testing results for a specific manufacturing lot of a ContinuumX Research product.

Each COA is intended to provide information regarding the identity, purity, and other applicable analytical characteristics of the tested manufacturing lot.

2. Independent Third-Party Testing

ContinuumX Research is committed to independent quality verification.

Each manufacturing lot is submitted to an independent analytical laboratory for testing prior to product release. Testing is performed using scientifically recognized analytical methods appropriate for the product being evaluated.

Testing laboratories operate independently of ContinuumX Research.

3. Manufacturing Lot Identification

Each Certificate of Analysis corresponds to a specific manufacturing lot.

Customers should verify that the lot number printed on their product label matches the lot number shown on the applicable COA before reviewing laboratory results.

COAs are valid only for the manufacturing lot identified on the document.

4. Information Contained in a COA

Depending on the product and analytical testing performed, a Certificate of Analysis may include:

  • Product identification
  • Manufacturing lot number
  • Date of analysis
  • Analytical methods utilized
  • Identity confirmation
  • Purity results
  • Additional analytical data, where applicable

The information contained in a COA applies only to the specific manufacturing lot tested.

5. Interpretation of Results

Certificates of Analysis are intended to provide analytical information regarding a specific manufacturing lot.

Analytical results should not be interpreted as evidence of product safety, efficacy, fitness for a particular purpose, or regulatory approval.

A COA confirms only the analytical testing performed and the corresponding laboratory findings for the tested manufacturing lot.

Analytical results represent the condition of the sample tested at the time of analysis and should not be interpreted as a guarantee of future product condition after shipping, storage, handling, or other factors beyond the control of ContinuumX Research.

6. Limitations of a COA

A Certificate of Analysis:

  • Does not constitute FDA approval.
  • Does not certify suitability for human or veterinary use.
  • Does not establish therapeutic, diagnostic, cosmetic, or clinical effectiveness.
  • Does not replace independent laboratory verification where required by the purchaser.
  • Does not extend beyond the manufacturing lot identified on the document.

7. COA Availability

Certificates of Analysis are made available for manufacturing lots offered by ContinuumX Research.

Customers may access the applicable COA through our website by locating the matching manufacturing lot number. The lot number is printed on the product label.

A COA may be located in either of the following ways:

  • Enter the complete manufacturing lot number on our Certificates of Analysis page.
  • Select the manufacturing lot from the COA tab on the applicable product page, which lists the five most recent lots for that product.

Certificates for earlier manufacturing lots remain available through the lot number search even when they are no longer listed on the product page.

If assistance locating a COA is needed, customers may contact ContinuumX Research using the information provided below.

8. Questions Regarding COAs

If you believe a Certificate of Analysis contains an error or if you have questions regarding a specific manufacturing lot, please contact ContinuumX Research before drawing conclusions regarding the product.

We may request the manufacturing lot number and supporting information to investigate the inquiry.

9. Research Use Only

Certificates of Analysis do not alter the intended Research Use Only status of ContinuumX Research products.

All products sold by ContinuumX Research are intended exclusively for lawful laboratory, analytical, and scientific research purposes and are not intended for human use, veterinary use, diagnostic use, therapeutic use, cosmetic use, food use, or household use.

10. Changes to This Policy

ContinuumX Research reserves the right to modify or update this COA Policy at any time.

Any revisions become effective upon posting the updated policy on this website unless otherwise stated.

11. Contact Information

If you have questions regarding this COA Policy or a specific Certificate of Analysis, please contact:

ContinuumX Research LLC

Questions? Reach us through the contact form, the fastest way to get a reply.